Desktop Constant Temperature Test Chamber

Desktop Constant Temperature Test Chamber and Button Battery Charge and Discharge Tester

AOT-MHW-25-S-16CH it is mainly used in the desktop constant temperature test box for pouch cell battery & button battery laboratory testing. It is more suitable for small-scale research and development and experimentation. It occupies less than half a square meter, freeing up more desktop space, and can observe the experiment situation in the box at any time.

Item NO.:
AOT-MHW-25-S-16CH
Lead Time:
15-20days
Product Orgin:
China
Brand:
AOTELEC
Shipping Port:
XIAMEN
Payment:
T/T, WesternUnion, MoneyGram, Paypal, Visa

Inquiry now

Product Detail

AOT-MHW-25-S-16CH it is mainly used in the desktop constant temperature test box for pouch cell battery & button battery laboratory testing.

It is more suitable for small-scale research and development and experimentation. It occupies less than half a square meter, freeing up more desktop space, and can observe the experiment situation in the box at any time.

Product Name	Desktop Constant Temperature Test Chamber
Volume	25L
Inner box size	W360mm×D300mm×H235mm
Dimensions	W440mm×D580mm×H410mm
Test environment conditions	The ambient temperature is +25°C, the relative humidity is ≤85%, and there is no sample in the test chamber (no load)
Temperature range	15～60℃
Temperature fluctuation	≤1°C (equivalent to ±0.5°C, no load, stable temperature)
Temperature deviation	±2.0°C (no load, stable temperature)Heating time
Heating time	25°C→60°C ≤50 min (no load, average non-linearity)
Cooling time	25°C→15°C ≤60 min (no load, average non-linearity)
Outer wall material	high-quality cold-rolled steel plate, surface spray and paint treatment
Inner wall material	stainless steel plate SUS304
Box insulation material	polyurethane foam
Air conditioning channel	DC fan, semiconductor refrigeration (heating) module
Test box standard configuration	Box door: hollow tempered glass + frame Cell fixture connection board: 2 pieces Lighting: LED lighting
Control panel	touch control buttons
Air conditioning unit	Semiconductor refrigeration (heating) module
Controller	LED digital display + touch key controller
Setting method	touch key
control method	Forced circulation ventilation. The control system controls the output of the semiconductor refrigeration (heating) module through the PID automatic calculation output according to the set temperature value, so as to achieve dynamic balance
Way of communication	Ethernet standard interface
Ambient temperature	25℃±3℃; Relative humidity: ≤85%; Air pressure: 86kPa～106kPa
Power supply	AC(220±10%)V /50Hz or AC(110±10%)V /60Hz single phase + protective earth wire 0.2kW 1A (220V) or 2A (110V)
Weight	45kg
Three ranges	5V10mA：5μA~ 1mA; 1mA~5mA; 5mA~10mA 5V20mA：5μA~1mA; 1mA~ 10mA; 10mA~ 20mA 5V50mA：5μA~1mA; 1mA~ 25mA; 25mA~50mA The current response time in the range is faster, the current control is more accurate, and the precision up to 0.05%.